Atlanta Solid Wood Flooring Key Procedures

Monday, 2 May 2016

By Ainsley G. Zaveri


Wood floors have a long lifespan and low maintenance requirements. Wood flooring is a do-it-yourself procedure due to its simplicity nature. However, manufacturers will recommend an experienced carpenter, builder, or any other qualified professional to carry out the process. After receiving the flooring materials from the supplier, you must leave them undisturbed and allow them to acclimatize. Others require being unpacked; hence, you should seek guidance from your supplier. Use fixing method during Atlanta solid wood flooring procedure to eliminate movement problems in the future.

Timber floors require to be installed correctly to minimize movements or sliding. Therefore, fixing methods are preferred over floating ones. When dealing with concrete, it is advisable to carefully examine it and find out its shape and appearance. Use sticky adhesive to fix timbers to rough concretes. Ensure you are using the best quality of glues. You can choose to visit several stores near you or seek the guidance of builders or carpenters during the process of selecting the glues. Be cautious when you are layering the woods since the errors you make at this stage cannot be corrected.

When you are installing the flooring material on the timber, you will have to nail them correctly. The nailing procedure should be carried out using high quality and firm nails. Remove skirting boards if you want to achieve a neat finish. Instead, you can use quadrant beading to incase the space created between the flooring material and skirting board.

Generally, it may take a span of two or three days to complete the layering process. Currently, there are engineered timbers that can produce perfect floor covering results. You need to make a decision on the layering direction you will take. Inward-opening entrances will have to be removed for the floor to function properly.

To ensure the project will be completed with a short time, assemble all your tools, products, and equipment close to the area you are flooring. Skirting board interfere with the appearance of floor surface hence should be removed using a crowbar. Vacuum the subfloors and make sure they are sparkling clean.

Install a vapor barrier beneath the flooring surface. Experienced professionals advise homeowners to use saturated asphalt. Alternatively, you can use red rosin paper. The vapor barriers are used to eliminate or decrease squeaks that occurs because of frictions between the two wood layers.

After layering all the rows of the flooring material, trim out the extended areas. Fill the nail holes with timber putty. Ensure you have purchased high quality putty that will resemble the paint. Use an eco-friendly and classic paint to add some style to the floor.




About the Author:



No comments:

Post a Comment

 

ads

Popular Posts